There are about five types of surfaces available for stainless steel. They can be combined to produce more end products.
The five types are:
1. Rolling surface treatment
2. Mechanical surface treatment
3. Chemical surface treatment
4. Grid surface treatment and color surface treatment
There are also some special finishes, but no matter which one is specified,
The following steps should be followed:
1. Agree with the manufacturer on the desired surface treatment, it is best to prepare a sample as a future mass production standard.
2. When using large areas such as composite panels, it is essential to ensure that the same batch of base coils or coils are used.
3. The manufacturing process should be taken into account when choosing a surface finish, for example: in order to remove the weld beads, the weld may need to be ground and the original surface treatment must also be restored. It is difficult or even impossible to meet this requirement.
4, For some surface treatments, the grinding or polishing texture is directional, called unidirectional. If you make this pattern vertical instead of horizontal when using it, dirt will not adhere easily to it and it will be easy to clean.